Login or Register for FREE!
Login or Register for FREE!
Subel. G
6 questions
Subelement G

Inspections, Installations and Instruments:

Section 50

Test Equipment-2:

What type of signals are usually provided by a simple Function Generator?

  • Sine Waves with pulse modulation.
  • Sine Waves and Square Waves.
  • Square Waves and Triangular Waves.
  • Correct Answer
    Sine Waves, Square Waves and Triangular Waves.
This question does not yet have an explanation! Register to add one

Tags: none

a SINAD meter consists of a multi-range audio frequency voltmeter:

  • Correct Answer
    Calibrated in decibels with a sharp internal 1000 Hz bandstop filter.
  • Calibrated in millivolts with a medium 1000 Hz bandpass filter.
  • Calibrated in decibels with an internal 1000 Hz highpass filter.
  • Calibrated in decibels with an internal 1000 Hz lowpass filter.

For more information, see What is sinad signal to noise and distortion

Last edited by kd7bbc. Register to edit

Tags: none

Which of the following statements about a logic probe is false?

  • A "Red" LED indicates a "High" state.
  • Correct Answer
    Both "Red" and "Green" LEDs on indicate a short.
  • A "Green" LED indicates a "Low" state.
  • An "Amber" LED indicates a "pulse".
This question does not yet have an explanation! Register to add one

Tags: none

An analog RF wattmeter provides the most accurate reading:

  • At the middle one third of the dial.
  • At the lower one third of the dial.
  • Correct Answer
    At the upper one third of the dial.
  • The accuracy is uniform the whole scale.
This question does not yet have an explanation! Register to add one

Tags: none

What is the purpose of a deviation meter?

  • Measure the number of sidebands.
  • Measure the modulation index.
  • Correct Answer
    Measure the carrier deviation in an FM transmitter.
  • Measure the carrier frequency.
This question does not yet have an explanation! Register to add one

Tags: none

What would be the most likely reason to observe the transmitter output with a spectrum analyzer?

  • Measure frequency modulation deviation.
  • Measure percentage of amplitude modulation.
  • Measure the carrier frequency.
  • Correct Answer
    Measure spurious signals.
This question does not yet have an explanation! Register to add one

Tags: none

Go to 49
HamStudy.org™ is copyright 2024 Signal Stuff™, All rights reserved.
View Privacy Policy    |    Get help with HamStudy.org™